§ 152.68 PRELIMINARY PLAT.
   (A)   General regulations. The preliminary plat shall be prepared by a licensed land surveyor at a scale of not more than one inch equals 100 feet. It may be prepared in pen or pencil, and the sheets shall be numbered in sequence if more than one sheet is used. All sheets shall be of such size as is acceptable for filing in the office of the County Recorder, but shall not be larger than 34 x 44 inches. The map prepared for the preliminary plat may be drawn on tracing cloth or reproducible mylar.
   (B)   Name.
      (1)   Name of subdivision if property is within an existing subdivision.
      (2)   Proposed name if not within a previously platted subdivision.
   (C)   Ownership.
      (1)   Name and address, including telephone number, of legal owner or owners or agent of property.
      (2)   Citation of any existing legal rights-of-way or easements affecting the property.
      (3)   Existing covenants on the property, if any.
      (4)   Name and address, telephone number, and registration number of the professional surveyor responsible for subdivision design, for the design of public improvements, and for surveys.
   (D)   Description. Location of property by lot or section township, range, and county (metes and bounds). Graphic scale, north arrow, and date shall be included.
   (E)   Features.
      (1)   Location of property lines, existing easements, burial grounds, railroad rights-of-way, watercourses, and existing wooded areas or trees eight inches or more in diameter, measured four feet above ground level; location, width, and names of all existing or platted streets or other public ways within the tract.
      (2)   The location of property with respect to surrounding property and streets, including the names of all adjoining property owners of record, the names of adjoining developments, and names of adjoining streets.
      (3)   Location, size, invert elevations, and slopes of existing sewers, water mains, culverts, and other underground structures within the tract and existing permanent buildings and utility poles on the tract.
      (4)   Approximate topographic contours shown at five-foot intervals in rolling or hilly terrain and two-foot intervals in level terrain, referenced to sea level datum and an established bench mark.
      (5)   The approximate location and width of proposed streets.
      (6)   Proposals for connection with existing water supply and sanitary sewer systems, or alternative means of providing water supply and sanitary waste disposal and treatment; and preliminary provisions for collecting and discharging surface water drainage.
      (7)   The approximate location, dimensions, and areas of all proposed or existing lots.
      (8)   The approximate location, dimensions, and area of all parcels of land proposed to be set aside for park or playground use or other public use, or for the use of property owners in the proposed subdivision.
      (9)   The location of temporary stakes to enable the local officials to find and appraise features of the proposed layout in the field, if needed.
         (10)   Whenever the preliminary plat covers only a part of an applicant’s contiguous holdings, the applicant shall submit, at the scale of no more than one inch equals 200 feet, a sketch of the entire holdings, including the proposed subdivision area, showing an indication of the probable future street and drainage systems, for the remaining portion of the tract.
         (11)   A vicinity map showing streets and other general development of the surrounding area. The preliminary plat shall show all school and improvement district lines with the districts properly designated.
(Ord. 29-1984, passed 8-14-84) Penalty, see § 152.99