(a) Exceptions.
(1) Two or more parcels, lots of record or platted lots, when contiguous and held in common ownership, may be treated as a single lot for purposes of the dimensional requirements of this Zoning Code, provided that such lots are located in the same district. This does not prevent the use of the lots as separate stand-alone parcels.
(2) Where a single lot of record, platted lot or parcel of land is within two or more zoning districts, it may be treated as two or more lots for purposes of this Zoning Code, provided that each portion has the required frontage on a street or place and meets all of the other standards for the district in which it is located.
(3) Where a lot of record on the effective date of this Zoning Code (Ordinance 10-2020, adopted on November 24, 2020) is less than fifty feet in width, the required side yard may be reduced to 10% of the width of the lot, provided that no side yard is less than four feet.
(4) More than one main multiple dwelling or commercial or industrial building may be located upon a lot, provided that such building conforms to all yard requirements for the district in which the lot is located.
(5) For purposes of this Zoning Code, the width of a lot shall be determined to be the width at the required front yard setback line.
(b) Prohibition of Flag Lots. The creation of flag or panhandle lots is prohibited.
(Ord. 10-2020. Passed 11-24-20; Ord. 03-2023. Passed 5-2-23; Ord. 12-2023. Passed 10-17-23.)