1426.01 2005 edition adopted.
1426.02 Purpose.
1426.03 Application.
1426.04 Compliance; violations.
1426.05 Change of use; maintenance. (Repealed)
1426.06 Enforcement.
1426.07 File and distribution copies.
1426.08 Conflict of laws.
1426.09 Additional requirements. (Repealed)
1426.99 Penalty
CROSS REFERENCES
See section histories for similar State law
Removal of unsafe structures - see Ohio R.C. 715.26(B), 715.261
Adoption of technical codes by reference - see Ohio R.C. 731.231
Power to enact further and additional regulations - see Ohio R.C. 3781.01
Enforcement - see Ohio R.C. 3781.03, 3781.031, 3781.10(E), 3781.102, 3781.19
Final jurisdiction - see Ohio R.C. 3781.04
Application - see Ohio R.C. 3781.06, 3781.061, 3781.10(A), 3781.11(A)
Dead bolt locks in apartment buildings - see Ohio R.C. 3781.103
Smoke detection system for apartments and condominiums - see Ohio R.C. 3781.104
Use of public buildings by handicapped persons - see Ohio R.C. 3781.111
Energy conservation - see Ohio R.C. 3781.181
Submission of plans - see Ohio R.C. 3791.04
Abandoned service stations - see Ohio R.C. 3791.11 et seq.
Safety standards for refuse containers - see Ohio R.C. 3791.21
Adoption of standard construction drawings and out-parcel construction drawings - see B. & H. 1440.10
Pursuant to Ohio R.C. 731.231, there is hereby adopted by and for the Municipality the Ohio Building Code (OBC), being particularly the 2005 edition thereof, together with the 2005 OPC and 2005 OMC,as adopted by the Ohio Board of Building Standards, Division of Industrial Compliance, Department of Commerce, and as published in Division 4101:2 of the Ohio Administrative Code (OAC), save and except such portions thereof as may be hereinafter amended or deleted. The City hereby adopts all subsequent editions to the Code as they are from time to time published.
(Ord. 128-05. Passed 8-8-05.)
The purpose of the OBC, as adopted in Section 1426.01, is to:
(a) Provide uniform minimum standards and requirements for the erection, construction, repair, alteration and maintenance of buildings, including construction of industrialized units, such standards relating to the conservation of energy, safety and sanitation of buildings for their intended use and occupancy;
(b) Formulate such standards and requirements, so far as is practical, in terms of performance objectives, so as to make adequate performance for the use intended the test of acceptability;
(c) Permit, to the fullest extent feasible, the use of materials and technical methods, devices and improvements, including the use of industrialized units, which tend to reduce the cost of construction and erection without affecting minimum requirements for the health, safety and security of the occupants or users of buildings or industrialized units and without preferential treatment of types or classes of materials or products or methods of construction; and
(d) Encourage, so far as may be practical, the standardization of construction practices, methods, equipment, material and techniques, including methods employed to produce industrialized units.
(OAC 4101:2-1-05) (Ord. 128-05. Passed 8-8-05.)
Loading...