Except as provided otherwise in this article, the following bulk regulations are applicable in a W1 District:
Lot size: | |
Average lot size | 1 acre |
Minimum lot size | 40,000 square feet |
For an industrial park | 20 acres |
Minimum setbacks for principal structures: | |
Front lot line | 50 feet |
Side lot line | 30 feet |
Rear lot line | 30 feet |
Freeway | 100 feet |
Divided principal arterial road | 60 feet |
Any other public road or right-of-way | 50 feet |
Minimum setbacks for accessory structures from rear and side lot lines | 25 feet |
Maximum coverage by structures and parking | 75% of gross area |
Minimum width at front building restriction line | 150 feet |
Maximum height limitations: | |
Principal structures | None if all setbacks are increased by one foot for each two feet of height in excess of 90 feet |
Accessory structures | None if all setbacks are increased by one foot for each two feet of height in excess of 25 feet |
Maximum single front elevation | 300 feet in length unless special architectural, landscaping, or topographic treatment, such as a change of material, texture, depression, berm, or other similar change, is employed. |
(Bill No. 4-05)