Except as provided otherwise in this article, the following bulk regulations are applicable in a C2 District:
Minimum lot size | 20,000 square feet |
Maximum coverage by structures and parking | 80% of gross area |
Minimum setbacks for principal structures: | |
Rear lot line | 25 feet |
All lot lines | 60 feet from right-of-way line of a divided principal arterial road |
Minimum setbacks for accessory structures in the side or rear yard: | |
Side lot line | 10 feet |
Rear lot line | 10 feet |
Minimum lot depth | 100 feet |
Maximum floor area ratio: | |
Generally | 1.0 |
For a mix of office, retail, and residential uses with at least 30% of the total floor area devoted to residential uses and for hospitals | 2.0 |
Maximum height limitations: | |
If two or more lot lines abut a residential district | 60 feet or to a maximum of 72 feet for development in which more than 50% of allowable lot coverage consists of environmental site design features approved by the Planning and Zoning Officer and all setbacks are increased by one foot for each foot of height in excess of 60 feet |
If one lot line abuts a residential district | 60 feet except that there shall be no maximum for development in which more than 50% of allowable lot coverage consists of environmental site design features approved by the Planning and Zoning Officer and all setbacks are increased by one foot for each three feet of height in excess of 60 feet |
Rear service area | Accessible by a 15-foot wide unobstructed right-of-way |
(Bill No. 4-05; Bill No. 60-10)