Subdivisions, new land uses and structures, and alterations to existing land uses and structures shall be designed, constructed, and established in compliance with the requirements in table 2-22 of this section in addition to the applicable standards (e.g., landscaping, parking and loading, etc.) in article 3, "Development Standards", of this title.
TABLE 2-22
PUBLIC/QUASI-PUBLIC (P/QP) AND OPEN SPACE (OS)
ZONING DISTRICTS DEVELOPMENT STANDARDS
Development Feature | Public/Quasi-Public1 | Open Space1 | |
Development Feature | Public/Quasi-Public1 | Open Space1 | |
Minimum lot size2 | 10,000 sq. ft. | 20 acres2 | |
Minimum lot frontage | -- | 150 ft. | |
Minimum lot dimensions (W: width; D: depth) | W: 60 ft. D: 100 ft. | -- | |
Maximum lot dimensions (width to depth) | 1:3 | 1:4 | |
Setbacks: | |||
Front | 15 ft. | 25 ft. | |
Rear3 | 10 ft. | 25 ft. | |
Side4 | 10 ft. | 25 ft. | |
Street side | 15 ft. | 25 ft. | |
Maximum floor area ratio (FAR)5 | 1.0 | -- | |
Maximum lot coverage | 70% | 10% | |
Height limit6 | 75 ft. | 35 ft. | |
Minimum district size | 5 acres | 100 acres | |
Other applicable regulations | See article 3, "Development Standards", of this title including the following standards: | ||
• Dedications and infrastructure improvement standards - chapter 9.30 of this title | |||
• Landscaping and native plant protection - section 9.09.050 of this article 2 | |||
• Performance standards - chapter 9.34 of this title, relating to avoiding adverse impact to adjoining properties relating to fire, explosive, or other hazards; noise or vibration; smoke, dust, odor or other form of air pollution; heat, cold, dampness; electrical or other disturbance | |||
• Property maintenance standards - chapter 9.35 of this title | |||
• Signs - chapter 9.36 of this title | |||
• Solar energy systems - chapter 9.46 of this title | |||
• Wind energy systems - chapter 9.46 of this title | |||
• Wireless communications facilities - chapter 9.44 of this title | |||
Notes:
1. All projects must comply with the performance standards indicating the acceptable levels of noise, vibration, air pollution, glare, and other possible pollutants that are set out in chapter 9.34, "Performance Standards", of this title.
2. Minimum lots size can be less if the subdivision application is filed concurrently with the planned development or conditional use permit application.
3. A rear yard is required only when the adjacent property is not designated commercial or industrial.
4. Side yards are only required if necessary for emergency access. If adjacent property is not commercial or industrial, a side yard shall be required along that side of the property.
5. Maximum allowed floor area ratio (FAR): Floor area/lot area.
6. Architectural features and equipment may exceed height pursuant to section 9.31.030 of this title.
(Ord. 253, 12-16-2014)