A. Residential-Hillside Reserve (R-HR): The R-HR Zoning District is established to provide areas for the development of hillside residential uses and similar and compatible uses and includes the following designations:
1. Residential-Hillside Reserve District (R-HR): One dwelling unit/twenty (20) acres. (Ord. 253, 12-16-2014)
No more than one dwelling unit is allowed on each lot, except as otherwise provided in section 9.08.100, "Accessory Dwelling Units", of this article 2. (Ord. 253, 12-16-2014; amd. Ord. 281, 11-6-2018)
B. Rural Living Districts (RL): The RL Zoning Districts are established to provide areas for the development and preservation of residential uses, incidental agricultural uses, and similar and compatible uses. There are the following RL Residential Zones that provide a variety of living environments based upon the required minimum gross lot size.
1. Rural Living District (RL-10): One dwelling unit/ten (10) acres.
2. Rural Living District (RL-5): One dwelling unit/five (5) acres.
3. Rural Living District (RL-2.5): One dwelling unit/2.5 acres.
4. Rural Living District (RL-1): One dwelling unit/acre. (Ord. 253, 12-16-2014)
No more than one dwelling unit is allowed on each lot, except as otherwise provided in section 9.08.100, "Accessory Dwelling Units", of this article 2.
C. Single-Family Residential Districts (RS): The RS Districts are established to provide areas for the development and preservation of residential subdivisions consisting of detached residences and accessory uses compatible with the residential use of the zone and includes the following designations. There are the following Single-Family (RS) Residential Zones that provide a variety of living environments based upon the required minimum net lot size. No more than one dwelling unit is allowed on each lot, except as otherwise provided in section 9.08.100, "Accessory Dwelling Units", of this article 2. Required minimum lot sizes for each of the following zones are as follows: (Ord. 253, 12-16-2014; amd. Ord. 281, 11-6-2018)
1. Single-Family Residential District (RS-2): Two (2) dwelling units/acre.
2. Single-Family Residential District (RS-3.5): 3.5 dwelling units/acre.
3. Single-Family Residential District (RS-5): Five (5) dwelling units/acre.
D. Multi-Family Residential District (RM): The RM Zone is established to accommodate higher density, multi-story residential development, with a focus on providing an intensity and function at locations within close proximity to recreation and community facilities and commercial services and includes the following designations:
1. Multi-Family Residential District (RM-4): Up to four (4) dwelling units/acre.
2. Multi-Family Residential District (RM-8): Up to eight (8) dwelling units/acre.
3. Multi-Family Residential District (RM-10): Up to ten (10) dwelling units/acre.
4. Multi-Family Residential District (RM-14): Up to fourteen (14) dwelling units/acre. (Ord. 253, 12-16-2014)