(a) Monuments shall be of concrete or stone with a minimum size of six inches by thirty inches, and shall be marked on top with a copper or brass dowel. Markers shall consist of iron pipes or steel bars at least fifteen inches long and not less than one-half inch in diameter.
(b) Monuments and markers shall be placed by a professional engineer or registered land surveyor so that the scored or marked point shall coincide exactly with the intersection of lines to be marked, and shall be set so that the top of the monument or marker is level with the surface of the surrounding ground.
(c) Monuments shall be set:
(1) At the intersection of all lines forming angles in the boundary of the development; and
(2) At the intersection of street right-of-way lines.
(d) Markers shall be set:
(1) At the beginning and ending of all curves along street property lines;
(2) At all points where lot lines intersect curves, either front or rear;
(3) At all angles in property lines of lots; and
(4) At all lot corners.
(e) Any monuments or markers that are removed shall be replaced by a professional engineer or registered land surveyor at the expense of the person removing them.
(Ord. 12-1982 §6.00. Passed 11-3-82.)