(a) The final plat shall contain all the information required by Section 1226.03(a) and (b)(1) and (2).
(b) The final plat shall also show:
(1) The layout and dimensions of lots and blocks;
(2) Parcels of land intended to be dedicated or temporarily reserved for public use or reserved by deed covenant, and the conditions proposed for such covenants and for the dedication;
(3) Building setback lines, shown graphically with dimensions at and to such lines;
(4) True angles and distances to the nearest established street lines and official monuments;
(5) Radii, internal angles, points of curvature, tangent bearings and lengths on centerlines of streets;
(6) All lot numbers and lines with accurate dimensions in feet and hundredths with bearings and angles to streets;
(7) The accurate location of all monuments, which shall be concrete six inches by six inches by thirty inches, with iron pipe cast in the center. One such monument shall be placed at each corner of such plat, and elsewhere as judged necessary by the Village Manager. In addition, a solid iron pin monument, three-quarters of an inch in diameter and thirty inches long, shall be placed by the surveyor at all points on boundary lines where there is a change of direction and at all lot corners. Prior to bond release, a surveyor's certified statement shall be filed with the Village Manager attesting that all required monuments and iron pins are in place. Iron pins and monuments shall be flagged.
(8) That the traverse of the exterior boundaries of the plat and of each block, when computed from field measurements of the ground, shall close within a limit or error of one foot to 10,000 feet of a perimeter before balancing the survey;
(9) A notarized certification by the owner or owners of the adoption of the plat and the dedication by them to public use of the street, utility easements and other public areas shown on the plat;
(10) A proper form for the approval by signature of the Planning Commission and Council, with space for signatures.
(c) Every plat shall be superimposed on a survey of the lands of the dedicators from which such plat is drawn and shall contain an accurate background drawing of any metes- and-bounds descriptions of the lands of the dedicators from which such plat is drawn.
(Ord. 91-12. Passed 12-2-91; Ord. 2020-27. Passed 10-19-20; Ord. 2022-10. Passed 4-18-22.)