A dry stack boat storage facility (a "dry stack facility") that is maintained as a permitted nonconforming use may be enlarged or expanded so long as such enlargement or expansion complies with all applicable provisions of the Code and the following provisions:
(A) The dry stack facility must be located in a C-3 Commercial District III zoning district.
(B) Such enlargement or expansion shall only be permitted when upon completion of the enlargement or expansion the number of boat storage slips in the dry stack facility is reduced below the number of such slips that existed before the expansion or enlargement took place.
(C) Such enlargement or expansion shall only be permitted when upon completion of the enlargement or expansion the foot print of the portion of the dry stack facility that is enlarged or expanded does not exceed 2,400 square feet.
(D) The permitted enlargement or expansion as described in this section shall be approved by the Director of Planning and Parks. The application for such enlargement or expansion shall be submitted in writing to the office of the Director of Planning and Parks and shall include a site plan that meets the requirements of subsection 155.5.3.1.
(E) Such enlargement or expansion shall comply with all other applicable provisions of the Code to include, but not be limited to, setbacks and building height.
(F) An enlargement or expansion permitted by this section shall be exempt from the requirement of obtaining a special use permit or an amendment to an existing special use permit.
(Ord. 1784, passed 4-11-19; Am. Ord. 1838, passed 3-10-22)