(A) The minimum lot area, lot width and lot depth shall conform to the requirements of the zoning district in which the plat is situated as required by Ch. 155 of this code of ordinances.
(B) Corner lots for residential use shall have additional width to permit appropriate building setback from both roads as required by Ch. 155 of this code of ordinances.
(C) Side lines of lots shall be approximately at right angles to road or street lines or radial to curved road or street lines.
(D) Double frontage lots shall be avoided, except where lots back on a highway or other arterial road, or where topographic or other conditions render subdividing otherwise unreasonable. Such double frontage lots shall have an additional depth of at least ten feet in order to allow space for screen planting along the back lot line.
(E) Every lot must have the minimum required frontage on a public dedicated road or street other than an alley, except in planned unit developments. On curvilinear streets, the required frontage may be measured at the building setback line.
(Ord. passed 12-11-1979)