1101.05 LOT AND BLOCK STANDARDS.
   Every Lot shall abut on a street, and double frontage Lots shall be avoided. At the intersection of two streets, property line corners shall be rounded by an arc of a minimum of ten- foot radius. Size, shape and orientation of residential Lots shall be appropriate to the location of the proposed Subdivision and for the types of development contemplated and in conformity with the Zoning Ordinance. Lot sizes shall conform to the Zoning Ordinance. Excessive depth in relation to width shall be avoided; depths in excess of twice the Lot width are not recommended. Side lines of Lots shall be approximately at right angles with or radial to the street line. Lots shall be of adequate size and shape to accommodate the off-street parking areas required by the Zoning Ordinance.
   The maximum length of blocks may not exceed 1200 feet. The width of a block shall normally be sufficient to allow two tiers of Lots of appropriate depth. Where frontage on a major thoroughfare is involved, the long dimension of the block shall front thereon in order to minimize access intersections.
(Ord. 12-2008. Passed 4-7-08.)