(A) Upon the promulgation of the national categorical pretreatment standard for a particular industrial user, the standard, when effective, shall be enforceable under this chapter. The city shall notify all known affected users of the applicable reporting requirements under 40 C.F.R. § 403.12.
(B) Final national categorical pretreatment standards:
(1) Job shop and independent printed circuit board manufacturers regulated by the electroplating point source category (40 C.F.R. part 413, as amended) have been given a compliance date of April 27, 1984. Integrated electroplating facilities regulated by the electroplating point source category, as amended, have been given a compliance date of June 30, 1984;
(2) Industrial users regulated by the metal finishing point source category (40 C.F.R. part 433, as amended) have been given a compliance date of February 15, 1986;
(3) Industrial users regulated by the copper forming point source category (40 C.F.R. part 468, as amended) have been given a compliance date of August 15, 1986;
(4) Industrial users regulated by the inorganic chemicals (Phase I) point source category (40 C.F.R. part 415, as amended) have been given a compliance date of June 29, 1985;
(5) Industrial users regulated by the porcelain enameling point source category (40 C.F.R. part 466, as amended) have been given a compliance date of November 25, 1985;
(6) Industrial users regulated by the pulp, paper, and paperboard point source category (40 C.F.R. part 430, as amended) have been given a compliance date of July 1, 1984;
(7) Industrial users regulated by the textile mills point source category (40 C.F.R. part 410, as amended) have been given a compliance date of September 2, 1985;
(8) Industrial users regulated by the timber products point source category (40 C.F.R. part 429, as amended) have been given a compliance date of January 26, 1984;
(9) Industrial users regulated by the coiling coating (Phase I) point source category (40 C.F.R. part 465, as amended) have been given a compliance date of December 1, 1985;
(10) Industrial users regulated by the leather tanning and finishing point source category (40 C.F.R. part 425, as amended) have been given a compliance date of November 25, 1985;
(11) Industrial users regulated by the coil coating (Phase II) point source category (40 C.F.R. part 465, as amended) have been given a compliance date of November 17, 1986;
(12) Industrial users regulated by the pharmaceutical manufacturing point source category (40 C.F.R. part 439, as amended) have been given a compliance date of October 27, 1986;
(13) Industrial users regulated by the electrical and electronic components point source category (40 C.F.R. part 469, as amended) have been given a compliance date for Subpart A- semiconductors and Subpart B- electronic crystle manufacturing have been given a compliance date of November 8, 1985 for arsenic. Subpart C- cathode ray tubes have been given a compliance date of July 14, 1986 for control of specified toxic metals, fluoride and total toxic organics;
(14) Industrial users regulated by the aluminum forming point source category (40 C.F.R. part 467, as amended) have been given a compliance date of October 24, 1986;
(15) Industrial users regulated by the iron and steel manufacturing point source category (40 C.F.R. part 420, as amended) have been given a compliance date of July 10, 1985;
(16) Industrial users regulated by the petroleum refining point source category (40 C.F.R. part 419, as amended) have been given a compliance date of December 1, 1985;
(17) Industrial users regulated by the steam electric power plants point source category (40 C.F.R. parts 125 and 423, as amended) have been given a compliance date of January 1, 1986;
(18) Industrial users regulated by the battery manufacturing point source category (40 C.F.R. part 461, as amended) have been given a compliance date of March 9, 1987;
(19) Industrial users regulated by the inorganic chemicals (Phase II) point source category (40 C.F.R. part 415, as amended) have been given a compliance date for subparts A, B, L, AL, AR, BA, and BC of July 20, 1980; for subparts AJ, AU, BL, BM, BN, and BO of August 22, 1987; and for all subparts not listed of June 29, 1985;
(20) Industrial users regulated by the nonferrous metal manufacturing (Phase I) point source category (40 C.F.R. part 421, as amended) have been given a compliance date of March 9, 1987; and
(21) Industrial users regulated by the organic chemicals and plastics and synthetic fibers category (40 C.F.R. part 414) have been given a compliance date of November 5, 1990.
(C) The USEPA will promulgate new categorical pretreatment standards from time to time. This chapter shall be amended to include any new standards applicable to this POTW.
(Prior Code, § 51.039) (Ord. 88-9, passed 9-20-1988) Penalty, see § 51.999