The following data shall be included with and as part of the site design submitted for final review and approval:
(a) Site Plan. The application shall include site plans drawn to a scale of one inch equals twenty feet, or to another scale as determined by the Planning Commission and adequate to determine compliance with the requirements of this Zoning Code, and provide the Planning Commission with any other information needed to evaluate the overall site design on the basis of the criteria set forth herein.
(b) Building Elevations and Other Information. The application shall include elevation drawings of all existing and proposed buildings on the site drawn to a scale of one inch equals four feet, or to another scale determined by the Planning Commission and adequate to determine compliance with the requirements of this Zoning Code, and provide the Planning Commission with any other information needed to evaluate the overall site design on the basis of the criteria set forth herein.
(c) Detailed Information. The following detailed information shall be submitted with the site plan and building elevations:
(1) The existing and proposed zoning.
(2) The location and size of all structures, including the location of entrances and loading points.
(3) All outside dimensions of each structure, its distance from the property lines, its area and its height.
(4) The number and location of each type of residential unit (one-bedroom units, two-bedroom units, etc.), and typical floor plans with square feet of floor area.
(5) The area of the site in square feet, excluding all existing rights-of-way.
(6) The recorded and measured dimensions of all lot lines and the location and design of all lots.
(7) Structures, uses, zoning, and other significant features of immediately adjacent property.
(8) The location of all existing and proposed drives, parking areas, and pedestrian circulation ways, including types of surfacing, parking layout, and dimensions.
(9) The dimensions of road widths and rights-of-way.
(10) All existing easements and vacated easements and rights-of-way.
(11) All required minimum setbacks from the existing or proposed rights-of-way and from adjacent properties.
(12) The locations of lawns, landscaped areas, and outdoor recreation areas, and how the landscaping is to be accomplished.
(13) The locations, sizes, and types of existing trees over one and three-fourths inches in diameter, before and after proposed development.
(14) The design and materials of construction of all fences, free-standing architectural walls, including typical cross sections and the heights above ground on both sides of free-standing walls.
(15) The location, intensity and orientation of all exterior lighting.
(16) The location, dimensions, and lighting of all signs.
(17) Photographs of the site and adjacent areas.
(18) The location and capacity of water and sewer services serving the site, and of existing and proposed septic tanks and wells.
(19) Topographic contours at two-foot intervals and any other information needed to evaluate storm drainage characteristics of the site.
(Ord. 106. Passed 12-9-81.)