(A) The crown of the pavement from the centerline to the edge of pavement shall be 1/4 inch per foot. If the topography warrants, a shallow swale shall be provided in order to properly channel the runoff into catch basins or inlets. In general, cut or fill slopes shall be as flat as topography permits but in no case shall they be steeper than three to one.
(B) The aggregate base course shall have a width of 24 feet and the bituminous surfacing shall have a width of 22 feet on local roads, and 36 feet and 34 feet respectively on collector roads. The slope of the pavement shall be 1/4 inch per foot. Earth shoulders shall be provided and shall be five feet in width measured from the edge of the base course. The slope of the shoulder shall be ½ inch per foot. The minimum distance from the edge of the shoulder to the edge of the two foot flat bottom ditch shall be six feet. The ditch shall be a minimum of one and one-half feet below the edge of the shoulder. In general, cut or fill slopes shall be as flat as the topography permits, but in no case shall they be steeper than three to one.
(Ord. 76-O-10, passed 9-21-76)