(A) All subdivision boundary corners shall be marked with monuments to grade and noted on the plat.
(B) The lengths, widths and shapes of blocks shall be determined with regard to:
(1) Provision of adequate building sites available to the special needs of the type of use contemplated;
(2) The need for convenient access, circulation, control and safety of traffic and utilities; and
(3) Limitations and opportunities of topography.
(C) Block lengths shall be between 300 and 1,000 feet and shall normally be wide enough to allow two tiers of lots of an appropriate depth.
(D) Lot dimensions shall be appropriate for the location of the subdivision and conform to the requirements of Chapter 154 of this code of ordinances.
(E) Depth and width of properties reserved or laid out for commercial and industrial purposes shall be adequate to provide off-street parking and loading for the use contemplated.
(F) Corner lots for residential use shall have extra width to allow for two front yards.
(G) All interior lot lines shall be a straight line or a series of straight lines. Curved interior lot lines shall be prohibited.
(H) Side lot lines shall be at right angles to streets except on curves where they shall be radial except when otherwise approved.
(I) Each lot shall abut a dedicated public right-of-way or approved private street.
(Prior Code, § 15.04.06) (Ord. 748, passed - -)