The following Indiana Department of Transportation (INDOT) Standard Drawings with the listed revision date and exceptions shall be used for all developments and sites in the Town of Winfield.
Detail Title
| INDOT Standard Drawing No.
| INDOT Revision Date
| Exceptions/Comments
|
Detail Title
| INDOT Standard Drawing No.
| INDOT Revision Date
| Exceptions/Comments
|
EROSION CONTROL | |||
Temporary Check Dam, Revetment Riprap | E 205-TECD-01 | 9/1/09 | |
Temporary Check Dam, Straw Bales | E 205-TECD-02 | 9/4/07 | |
Temporary Sediment Trap | E 205-TECD-04 | 3/1/04 | |
Temporary Ditch Inlet Protection, Gravel Ring | E 205-TECI-01 | 3/1/02 | |
Temporary Ditch Inlet Protection, Geotextile Box | E 205-TECI-02 | 3/1/02 | |
Temporary Ditch Inlet Protection Slotted Barrel | E 205-TECI-03 | 3/1/02 | |
Temporary Silt Fence | E 205-TECP-02 | 9/1/10 | |
Temporary Ditch Interceptor | E 205-TECS-01 | 3/1/02 | |
SIDEWALKS/CURB RAMPS | |||
Sidewalk Expansion Joint | E 604-CCSJ-01 | 9/1/99 | |
Sidewalk Details | E 604-SDWK-01 | 9/1/05 | Sidewalks abutting curbs shall be a minimum of 8 feet wide; Sidewalks with utility strips/parkway shall be a minimum of 5 feet wide. |
Location Plan For Sidewalk Curb Ramps | E 604-SWCR-01 | 9/1/05 | |
Sidewalk Curb Ramps General Notes and Details | E 604-SWCR-02 | 9/1/05 | |
Sidewalk Curb Ramp Type A | E 604-SWCR-03 | 9/1/05 | |
Sidewalk Curb Ramp Type B | E 604-SWCR-04 | 9/1/05 | |
Sidewalk Curb Ramp Type C | E 604-SWCR-05 | 9/1/05 | |
Sidewalk Ramp Curb Type D | E 604-SWCR-06 | 9/1/05 | |
Detail Title | INDOT Standard Drawing No. | INDOT Revision Date | Exceptions/Comments |
Detail Title | INDOT Standard Drawing No. | INDOT Revision Date | Exceptions/Comments |
SIDEWALKS/CURB RAMPS | |||
Sidewalk Curb Ramps Type E | E 604-SWCR-07 | 9/1/05 | |
Sidewalk Curb Ramps Type F | E 604-SWCR-08 | 9/1/05 | |
Sidewalk Curb's Ramp's Type G and H | E 604-SWCR-09 | 9/1/05 | |
Sidewalk Curb Ramp Type K | E 604-SWCR-10 | 9/1/05 | |
Sidewalk Curb Ramps Type L | E 604-SWCR-11 | 9/1/05 | |
Sidewalk Curb Ramp's Improved Access | E 604-SWCR-12 | 9/1/05 | |
STORM DRAINAGE | |||
Metal Pipe End Section | E 715-MPES-01 | 11/15/99 | |
Metal Pipe Arch End Section | E 715-MPES-02 | 11/15/99 | |
Metal Pipe End Section Connections | E 715-MPES-03 | 7/27/99 | |
Precast Concrete End Section | E 715-PCES-01 | 11/15/99 | |
Pipe Height Of Cover Limits | E 715-PHCL-19 | 11/15/99 | PVC Pipe shall not be used for storm sewer beneath or within five feet of the roadway pavement |
Pipe Height Of Cover Limits | E 715-PHCL-21 | 9/1/09 | |
Pipe Height Of Cover Limits | E 715-PHCL-22 | 9/1/09 | |
Pipe Height Of Cover Limits | E 715-PHCL-23 | 11/15/99 | |
Safety Metal Culvert End Sections For Corrugated Pipe | E 715-SMES-01 | 9/1/00 | Safety Metal Culvert End Sections shall be used within the roadway clear zones |
Safety Metal Culvert End Sections For Corrugated Pipe | E 715-SMES-02 | 7/27/99 | |
Safety Metal Culvert End Sections For Corrugated Pipe | E 715-SMES-03 | 7/27/99 | |
Safety Metal Culvert End Sections For Corrugated Pipe | E 715-SMES-04 | 7/27/99 | |
Safety Metal Culvert End Sections For Corrugated Pipe | E 715-SMES-05 | 7/27/99 | |
Detail Title | INDOT Standard Drawing No. | INDOT Revision Date | Exceptions/Comments |
Detail Title | INDOT Standard Drawing No. | INDOT Revision Date | Exceptions/Comments |
STORM DRAINAGE | |||
Safety Metal Culvert End Sections For Corrugated Pipe | E 715-SMES-06 | 11/15/99 | |
Safety Metal Culvert End Sections For Smooth Pipe | E 715-SMES-08 | 7/27/99 | |
Safety Metal Culvert End Sections For Smooth Pipe | E 715-SMES-09 | 7/27/99 | |
Safety Metal Culvert End Sections For Smooth Pipe | E 715-SMES-10 | 7/27/99 | |
Safety Metal Culvert End Sections For Smooth Pipe | E 715-SMES-11 | 7/27/99 | |
Safety Metal Culvert End Sections For Smooth Pipe | E 715-SMES-12 | 11/15/99 | |
Catch Basin Type A | E 720-CBST-01 | 9/2/08 | Catch basins shall not be made of brick or block |
Catch Basin Type E | E 720-CBST-03 | 11/15/99 | |
Catch Basin Type W | E 720-CBST-08 | 9/2/03 | |
Catch Basin Hood | E 720-CBST-09 | 11/15/99 | |
Earth Ditch Casting Type 7 | E 720-EDCA-01 | 11/15/99 | |
Manhole Casting Type 4 Ring and Cover | E 720-MHCA-02 | 11/15/99 | |
Manhole Casting Type 4 Alternate Cover | E 720-MHCA-03 | 11/15/99 | |
Manhole Type C | E 720-MHST-02 | 11/15/99 | |
Manholes Type D, E, F, and G | E 720-MHST-04 | 9/2/03 | |
Manholes Type H, J, K, L, M, and N | E 720-MHST-05 | 9/1/06 | |
Precast Concrete Manhole Sections | E 720-MHST-06 | 11/15/99 | |
Precast Manhole Bottom Section | E 720-MHST-07 | 11/15/99 | |
Manhole Bars and Concentric Cone | E 720-MHST-08 | 9/2/03 | |
Detail Title | INDOT Standard Drawing No. | INDOT Revision Date | Exceptions/Comments |
STORM DRAINAGE | |||
Manhole Step | E 720-MHST-09 | 11/15/99 | |
Table Of Reinforcing Steel For Manhole | E 720-MHST-10 | 11/15/99 |
(Ord. 157, passed 5-29-2007; Am. Ord. 210, passed 9-11-2012)