(a) Prior to the issuance of any permit which is included under the provisions of this article, a plot plan to a scale of one inch equals 50-foot minimum, or size as approved by the Bureau of Codes and City Engineer, shall be submitted for review by the Bureau of Codes and City Engineer, and, at their discretion, the Shade Tree Commission.
(b) Each site plan submitted for approval shall provide for:
(1) The preservation of desirable existing trees and shrubs;
(2) The preservation, insofar as possible, of natural rock outcroppings and natural topographic features;
(3) Adequate planting density;
(4) A variety of plant species to provide interest throughout the year with color and texture of foliage, bark, flowers and fruit that are displayed at various seasons;
(5) Proper selection and diversification of plant species to minimize the possibility of damage due to insects and disease;
(6) Plant species which are suitable for use in Williamsport soil conditions (see list available from Bureau of Codes and Shade Tree Commission); and
(7) Proper planting information at the time of installation to ensure a successful planting. Such information shall include:
(A) Location, size, species (both common and scientific names shall be given), quantity and variety of existing trees over three inches in caliper. Trees of suitable species that are in good condition shall be retained on the site whenever possible;
(B) Location, size, species (both common and scientific names shall be given), quantity and variety of trees and shrubs to be planted;
(C) Foundation planting in an enlarged scale of 1:20 or larger if necessary to clearly illustrate plant locations or spacing;
(D) All adjacent uses, structures, walkways, driveways, parking areas and garbage receptacles; also, fences or buffers with dimensions and including front and rear elevations; and
(E) Lot area in acreage or square feet.
(Ord. 5868, approved 5-16-2002)