Seven prints of the preliminary plat shall be submitted to the Plats Officer. These may be blue lines or blue line prints at a scale of not more than 100 feet to the inch, and shall show correctly on its face the following information:
(A) Date, scale and north point.
(B) The proposed subdivision name (including city, county and state).
(C) The name and address of the owner, the subdivider and surveyor responsible for surveys.
(D) The actual boundary survey and legal description, the acreage to be subdivided, and the location of the subdivision by quarter section, township and range.
(E) A detailed vicinity sketch or small scale drawing of the area within which the subdivision lies, with the location of the subdivision, indicated thereon.
(F) The exact length and bearing of the exterior boundaries of the subdivision. Dimensions shall be expressed in feet and decimal of a foot.
(G) Location and names of adjacent subdivisions and the owners of adjacent parcels of unsubdivided land.
(H) Location, width, and names of all existing and platted streets, alleys, and other public ways and easements, railroad and utility right-of-way, parks, cemeteries, watercourses, drainage ditches, permanent buildings, bridges, and other pertinent information as determined by the Planning Commission.
(I) The water elevation of adjoining lakes or streams at the date of the survey and approximate high and low water elevations of such lakes and streams.
(J) If a major watercourse lies adjacent to or crosses the property it shall be necessary for the registered engineer to submit cross sections, drainage easements, building setback lines and supporting calculations based upon the 100-year flood history.
(K) Layout, width, grades, and proposed names of all new streets and rights-of-way, including alleys, highways, easements for sewer and water mains, and other public utilities.
(L) Existing sewer, water mains, culverts, and other underground structures within the tract or immediately adjacent thereto.
(M) Plans of proposed utility layout (water, sewer and stormwater) showing connections to any existing or proposed utilities system.
(N) Approximate location and area of all property proposed to be dedicated or reserved for public use or to be reserved by deed covenant for use of all property owners in the subdivision, with conditions, if any, of such dedication or reservations.
(O) Approximate dimensions of areas of lots. All lots over one acre in size shall have the area marked on them within the lot.
(P) Proposed setback lines.
(Q) Approximate radii of all curves, length of tangents, central angles of all streets.
(R) Contours at vertical intervals of not more than two feet. In cases where the land has less than 2% slope, spot elevation shall be required.
(S) Location and dimensions of all proposed water line and fire hydrants.
(T) Street sign locations.
(U) Street light locations.
(V) If the proposed subdivision is a portion of a tract which is later to be subdivided in its entirety, then a tentative master plan of the entire subdivision shall be submitted with the preliminary plat of the portion first to be subdivided. The master plan shall conform in all respects to the requirements of the sketch plat described.
(W) Location and description of all section line corners and government survey monuments in or near the subdivision to at least one of which the proposed subdivision shall be referenced.
(Ord. 172, passed 6-8-87) Penalty, see § 153.99