(A) Definitions. As used in this section:
GLASS COATING MATERIAL or SUNSCREENING DEVICES. Materials, films, applications or devices which are used in conjunction with approved vehicle glazing materials for the purpose of reducing the effects of sun, but shall not include materials, films, applications, or devices with a mirrored or mirror-like finish.
LIGHT TRANSMISSION. The percentage of total light which is allowed to pass through a window.
LUMINOUS REFLECTANCE. The ratio of the amount of total light, expressed in percentages, which is reflected outward by the glass coating material or sunscreening device to the amount of total light falling on the glass coating material.
MANUFACTURER.
(a) A person who engages in the manufacturing or assembling of sunscreening devices; or
(b) A person who fabricates, laminates, or tempers glazing materials, incorporating the capacity to reflect or to reduce the transmittance of light during the manufacturing process.
WINDOW. The windshield, side or rear glass of a motor vehicle, including any glazing material, glass coating or sunscreening device.
(B) It is unlawful, except as provided by this section, for a person to sell, install, or to operate a motor vehicle with any object or material:
(1) Placed, displayed, installed, affixed, or applied upon the windshield or side or rear windows; or
(2) So placed, displayed, installed, affixed, or applied in or upon the motor vehicle so as to obstruct or reduce a driver's clear view through the windshield or side or rear windows.
(C) It is unlawful for any person to place, install, affix, or apply any transparent material upon the windshield or side or rear windows of any motor vehicle if such material alters the color or reduces the light transmittance of such windshield or side or rear windows except as provided in this section.
(D) This section shall not apply to:
(1) Side or back windows that have a substance or material in conjunction with glazing material that has a light transmission of at least 25% and a luminous reflectance of at most 25%;
(2) Front side wing vents and windows that have a substance or material not attached in conjunction with glazing material which is used by a vehicle operator on a moving vehicle during daylight hours;
(3) Rearview mirrors;
(4) Adjustable non-transparent sun visors which are mounted forward of the side windows and are not attached to the glass;
(5) Signs, stickers, or other materials which are displayed in a 49 square-inch area in the lower corner of the windshield farthest removed from the driver or signs, stickers, or other materials which are displayed in a 49 square-inch area in the lower corner of the windshield nearest the driver;
(6) Direction, designation, or termination signs on buses, if the signs do not interfere with the driver's clear view of approaching traffic;
(7) Rear window wiper motors;
(8) Rear window defrosters or de-foggers;
(9) Rear truck lid handle or hinges;
(10) Side windows to the rear of the driver or back windows that have a substance or material in conjunction with glazing material that has a light transmission of at least 10% and a luminous reflectance of at most 25% on all vehicles manufactured prior to 1996 year models, if the motor vehicle is equipped with outside mirrors on both left and right hand sides of the vehicle that are so located as to reflect to the driver a view of the highway through each mirror for a distance of at least 200 feet to the rear of the motor vehicle;
(11) Transparent material which is installed, affixed, or applied to the topmost portion of the windshield if:
(a) It does not extend downward beyond the AS-1 line or more than five inches from the top of the windshield, whichever is closer to the top of the windshield; and
(b) The material is not red or amber in color.
(12) All windows to the rear of the driver's seat in a vehicle licensed as a bus, or a taxicab;
(13) Vehicles not subject to registration in the State of Oklahoma;
(14) Implements of husbandry as defined by this section; and
(15) Law enforcement vehicles which are owned by the state or a political subdivision of the state.
(E) This section shall not prohibit the use and placement of federal, state, or political subdivision certificates on any window as are required by applicable laws.
(F) Louvered materials, when installed as designed, shall not reduce the area of the driver's visibility below 50% as measured on a horizontal plane. When such materials are used in conjunction with the rear window, the measurement shall be made based upon the driver's view from inside the rearview mirror.
(G) A person who sells or installs any product regulated by this section shall certify in a written statement, which shall be a part of the contract for sale or installation and shall be in bold-face type, that:
(1) The product sold or installed is in compliance with the reflectivity and transmittance requirements of this section;
(2) The installation of the product to the driver's or passenger's side window may be illegal in some states.
(H) The Commissioner of Public Safety, upon application from a person required for medical reasons to be shielded from the direct rays of the sun, supported by written attestation of such fact from a physician licensed pursuant to 59 O.S. § 495, may issue an exemption from the provisions of this section for a motor vehicle belonging to such person or in which such person is a habitual passenger. Any person may operate a vehicle or alter the color or reduce the light transmitted through the side or rear windows of a vehicle in accordance with an exemption issued by the Commissioner.
(I) Any person who violates any provision of this section, upon conviction, shall be guilty of a misdemeanor and shall be punished as provided for 47 O.S. § 17-101.
(Ord. 2023-05, passed 5-8-2023)