The following information must be included in all
applications.
133.04(A) An engineering report, from an
licensed to practice in the
of Florida or by an
exempt from such requirement under Florida
, and with experience with radio frequency and
, that shall include:
133.04(A)(1) A statement of compliance with this Chapter and all applicable
codes, associated regulations and safety standards as provided herein. The statement shall include certification that the
can support the load superimposed from the
(s).
133.04(A)(2) The type of
and specifics of design including, if appropriate, the following:
133.04(A)(2)(a) Equipment brochures for the proposed
such as manufacturer’s specifications or trade journal reprints. These shall be provided for the
, mounts,
, cables as well as cable runs, and security barrier, if any;
133.04(A)(2)(b) Materials of the proposed
specified by generic type and specific treatment (i.e., anodized aluminum, stained wood, painted fiberglass, etc.). These shall be provided for the
, mounts,
, cables as well as cable runs, and security barrier, if any;
133.04(A)(2)(c) Colors of the proposed
represented by a color board showing actual colors proposed. Colors shall be provided for the
, mounts,
, cables as well as cable runs, and security barrier, if any;
133.04(A)(2)(d) Dimensions of the proposed
specified for all three directions: height, width and breadth. These shall be provided for the
, mounts,
and security barrier, if any; and
133.04(A)(2)(e) A visual impact analysis, with a minimum of two photo digitalization or photographic superimpositions of the
and proposed
within the subject property. The photo digitalization or photographic superimpositions shall be provided for all attachments, including: the
, mounts,
, cables as well as cable runs, and security barrier, if any for the total height, width and breadth, as well as at a distance of 250 feet and 500 feet from all properties within that range, or at other points agreed upon in a pre-application conference.
133.04(A)(3) Current wind-loading capacity and a projection of wind-loading capacity using different types of
as contemplated by the
. No
shall be permitted to have its wind loading capacity lower than as provided for by the Florida Building Code.
133.04(A)(4) A certification that the proposed
, including reception and transmission functions, is not expected to interfere with or obstruct transmission to and from existing
facilities or any other Wireless Communications services;
133.04(A)(5) A description of the geographical service area requirements; and
133.04(A)(6) If necessary, a remedial action plan, subject to the
’s approval, that includes, but is not limited to, procedures to rectify any interference or obstruction with
, its plans to make all necessary repairs and/or accommodations to alleviate the Interference or obstruction, and a period of compliance.
133.04(B) An inventory of existing sites. Each
shall provide the
with an inventory of its Pre-Existing
and
, and the pre-existing sites of any other
,
and
within a three-mile radius of the
.
133.04(C) A copy of the executed lease agreement of the
where the
and/or
will be collocated; and
133.04(D) Additional information that the
may request consistent with this Chapter and applicable
to process the application. In the event the
requests any additional information, the time in which an application is processed shall be tolled pending receipt and further evaluation.
(Ord. 2010-23, passed 10-4-2010)