127.36(A) An engineering permit may only be issued for the installation of speed humps provided the following criteria are met:
127.36(A)(1) Installation requires 67% (minimum) approval by affected property
, which approval shall be obtained by the utilization of a standard petition form provided by the city. The “affected property
” for installations within a privately maintained community or subdivision shall be defined as the entire membership of the
. The “affected property
” for installations on a public cul-de-sac or no-outlet condition
shall be all homeowners with lots having direct access onto the subject
. The “affected property
” for installations on a public through
shall be defined as all homeowners located within a half mile band width perpendicular to the centerline of the
extending a half mile along the
in each direction from the proposed installation.
127.36(A)(1)(a) Speed humps may only be installed on
classified as
with an average daily
count not to exceed 2,000 average daily trips.
127.36(A)(1)(b) A
study performed by a licensed
that demonstrates a minimum measured 85th percentile speed of ten mph greater than the posted speed limit on the subject
shall be submitted by the
.
(Ord. 2010-20, passed 10-4-2010)