124.47(A) Dimension requirements.
Zoning District | Min.
Size | Min.
| Max. | Front | Rear | Side |
Side | Minimum S.F. |
Zoning District | Min.
Size | Min.
| Max. | Front | Rear | Side |
Side | Minimum S.F. |
R1 | 4,000 s.f. | 25 ft. | 35 ft. | 20 ft. | 10 ft. | 5 ft. | 20 ft. | 1,200 |
R2 | 7,150 s.f. | 35 ft. | 35 ft. | 20 ft. | 15 ft. | 5 ft. | 20 ft. | 1,200 |
R3 | 7,500 s.f. | 35 ft. | 35 ft. | 20 ft. | 15 ft. | 7.5 ft. | 20 ft. | 1,200 |
R4 | of record | of record | 35 ft. | 25 ft. | 15 ft. | 7.5 ft. (5 ft. for lots less than 60 ft. in width) | 25 ft. | 1,200 |
RE | 10,000 | 45 ft. | 35 ft. | 25 ft. | 15 ft. | 10 ft. | 25 ft. | 1,200 |
RZ | 4,000 s.f. | 25 ft. | 35 ft. | 20 ft. | 15 ft. | 0/10 ft. | 20 ft. | 1,200 |
Multi-
| ||||||||
Zoning District | Min.
Size | Min.
| Max. | Front | Rear | Side | Min. Unit S.F. |
Separation |
MF1 | 5 acres | - | 35 ft. | 25 ft. | 20 ft. | 15 ft. | 1 br 750 s.f., 2 br 900 s.f., 150 s.f. each add. br | 15 ft. |
MF2 | 5 acres | - | 50 ft. | 35 ft. | 30 ft. | 15 ft. | 1 br 750 s.f., 2 br 900 s.f., 150 s.f. each add. br | 15 ft. |
MF3 | 5 acres | - | 100 ft. | 45 ft. | 40 ft. | 15 ft. | 1 br 750 s.f., 2 br 900 s.f., 150 s.f. each add. br | 15 ft. |
MF4 | 10 acres | - | 150 ft. | 45 ft.* | 40 ft.* | 15 ft.* | 1 br 750 s.f., 2 br 900 s.f., 150 s.f. each add. br | 15 ft. |
* For any
within the MF4 district that has
on two
, the
shall be measured from the shorter of the property lines abutting a
and the
shall be measured from the longer of the property lines abutting a
. Lots within the MF4 district having
on two
shall be exempt from the double
requirements provided in § 124.48(B) and § 124.50. | ||||||||
Nonresidential | |||||
Zoning District | Min.
Size | Max. | Front | Rear | Side |
Nonresidential | |||||
Zoning District | Min.
Size | Max. | Front | Rear | Side |
I-1 | 2 acres | 35 ft. | 50 ft. | 25 ft. | 25 ft. |
O-1 | 1 acre | 65 ft. | 50 ft. | 25 ft. | 25 ft. |
C-1 | 1 acre | 35 ft. | 25 ft. | 25 ft. | 25 ft. |
CF | 1 acre | 25 ft. | 25 ft. | 25 ft. | |
GC | Existing | 42 ft. | 100 ft. | 100 ft. | 100 ft. |
CV | Existing | Existing | Existing | ||
AE | Existing | Existing | 35 ft. | ||
124.47(A)(1) Platted lots. Properties platted prior to January 21, 2003 shall be deemed to meet the minimum lot size requirements of the applicable zoning district.
124.47(B) Setback
. Every part of every required yard Setback shall be open and unobstructed except as hereinafter provided or as otherwise permitted in this Code.
124.47(B)(1) Mechanical equipment, including, but not limited to air conditioning units,
and swimming pool equipment, may not project over 60 inches from the
wall into a required minimum yard
, except generators. Generators may encroach no more than 50% from the building wall into a required minimum rear or side yard
and shall be prohibited within five feet of the adjacent front plane of the house.
from the
and any operable openings shall be governed by the Florida Building Code. All generator fuel tanks shall be located below ground.
124.47(B)(3) Accessory
and
shall require the same
as principal
except as follows:
124.47(B)(3)(a) Side and rear yard
for
and
, on
not on a Corner, may be reduced to five feet for Accessory Buildings and
when located on the rear half of the plot behind the principal
provided no encroachment onto a recorded easement would be created.
124.47(B)(3)(b) Notwithstanding any other provision in this Code, in agricultural and estate zoning districts Accessory
and
for the housing or shelter of
shall require a minimum Setback of 50 feet from all plot lines.
124.47(B)(4) In residential districts accessory
may not exceed 12 feet in
.
124.47(B)(5)
overhangs may not project more than 18 inches into a required yard (24 inches if the distance to the property line is ten feet or greater).
124.47(C) Rooftop Equipment. No portion of any Rooftop equipment may project above the
or screening including all mechanical, electrical equipment, vents and stacks.
(Ord. 2010-21, passed 10-4-2010; Am. Ord. 2012-12, passed 6-18-2012; Am. Ord, 2014-19, passed 8- 18-2014; Am. Ord. 2015-21, passed 9-21-2015; Am. Ord. 2016-14, passed 7-5-2016; Am. Ord. 2016-17, passed 9-12-2016; Am. Ord. 2018-05, passed 6-4-2018; Am. Ord. 2018-10, passed 7-2-2018; Am. Ord. 2018-14, passed 11-19-2018)