51.03(A) Time of inspections. The shall inspect all for operation and shall verify the presence of
prior to being placed in service or available for use, and on an annual basis.
51.03(B) Requirements. and
shall be:
51.03(B)(1) Conspicuously located in plain view of the primary public entrance, with unobstructed access;
51.03(B)(2) Housed in a cabinet with a clear window in the door, an audible alarm signaling the opening of the door, permanently affixed to a wall, and whose top is no more than 48 inches above the floor;
51.03(B)(3) The shall be located below a
having a minimum area of 70 square inches and containing the letters “AED” and the universally recognizable “AED” symbol, which shall be placed no more than 60 inches, on center, above the floor;
51.03(B)(4) Readily accessible and immediately available when needed for
employees and the general public, including disabled
; and
51.03(B)(5) Placed near the elevator(s) in the first floor lobby, if the
contains an elevator.
51.03(B)(6) The
shall be located below a three-way Sign having a minimum area of 70 square inches with a
supplied
(SBK) sticker affixed to it. The sticker may also be placed on the cabinet containing the
.
51.03(C)(1) Content requirement for
. shall contain adult and pediatric pads and bandage scissors.
51.03(C)(2) Content Requirement for Regular
. Regular
, shall minimally contain:
51.03(C)(2)(a) Two commercially manufactured tourniquets;
51.03(C)(2)(b) Four gloves;
51.03(C)(2)(c) One scissor;
51.03(C)(2)(d) Two three-inch gauze rolls:
51.03(C)(2)(e) Instructional Booklet on Bleeding Control;
51.03(C)(2)(f) Two gauze combine pads.
51.03(C)(2)(g) One marker.
51.03(C)(3) Content Requirement for Large
. Large
for places of occupancy that hold 500 or more shall minimally contain:
51.03(C)(3)(a) Eight commercially manufactured tourniquets;
51.03(C)(3)(b) Eight gloves;
51.03(C)(3)(c) Two scissors;
51.03(C)(3)(d) Eight three-inch gauze rolls:
51.03(C)(3)(e) Instructional Booklet on Bleeding Control;
51.03(C)(3)(f) Eight gauze combine pads.
51.03(C)(3)(g) One marker.
51.03(D) Manufacturer’s guidelines. All and
shall be used in accordance with manufacturer’s guidelines.
51.03(E) Owner’s responsibilities. It shall be the responsibility of the
of the
to:
51.03(E)(1) Install
and
;
51.03(E)(2) Provide all necessary training for appropriate use; and
51.03(E)(3) Maintain
and
in accordance with the manufacturer’s recommended maintenance requirements and as required herein.
51.03(E)(4) Verify and properly maintain the contents of the
.
51.03(F) Replacement. If an or
is removed for repair, a replacement shall be provided.
(Ord. 2010-12, passed 10-4-2010; Am. Ord. 2019-06, passed 6-3-2019)