7-2-6: POWERS AND AUTHORITY OF INSPECTORS:
   A.   Inspection: The City Manager and other duly authorized employees of the City, the Iowa Department of Environmental Quality and the U.S. Environmental Protection Agency bearing proper credentials and identification shall be permitted to enter all properties for the purposes of inspection, observation, measurements, sampling, and testing in accordance with the provisions of this chapter. The City Manager or his representatives shall have no authority to inquire into any processes including metallurgical, chemical, oil, refining, ceramic, paper, or other industries beyond that point having a direct bearing on the kind and source of discharge to the sewers or waterways or facilities for waste treatment.
   B.   Inspection On Easements: The City Manager and other duly authorized employees of the City, the Iowa Department of Environmental Quality and the U.S. Environmental Protection Agency, bearing proper credentials and identification shall be permitted to enter all private properties through which the City holds a duly negotiated easement for the purposes of, but not limited to, inspection, observation, measurement, sampling, repair, and maintenance of any portion of the sewage works lying within said easement. All entry, and subsequent work, if any, on said easement, shall be done in full accordance with the terms of the duly negotiated easement pertaining to the private property involved.
   C.   Hold Harmless Agreement: While performing the necessary work on private properties referred to in subsection A of this section, the City Manager or duly authorized employees of the City shall observe all safety rules applicable to the premises established by the company and the company shall be held harmless for injury or death to the City employees and the City shall indemnify the company against loss or damage to its property by City employees and against liability claims and demands for personal injury or property damage asserted against the company and growing out of the gauging and sampling operation, except as such may be caused by negligence or failure of the company to maintain safe conditions as required in section 7-2-12 of this chapter. (Ord. 18-79, 1-2-1980)