The fees as hereinafter listed shall be the fee for the required permit and shall include the cost of inspection.
(a) All new buildings or structures or additions, for
each contractor:
(1) Initial base fee commercial | $100.00 |
(2) Initial base fee residential | 50.00 |
(3) Per square foot of floor area (single tenant and new residential) | .050 |
(4) Shell construction only, per sq. ft. (multiple tenant) | .025 |
(5) Each tenant buildout space in new construction per sq. ft. | .025 |
(b) Alterations or replacements to existing heating
and/or air conditioning systems:
(1) Base fee commercial | 100.00 |
(2) Base fee residential | 50.00 |
(3) Also per sq. ft. | .025 |
(4) Furnace replacement | 25.00 |
(5) Air conditioning replacement | 25.00 |
(6) Furnace and air conditioning replacement, including rooftop units | 50.00 |
(7) Duct work fee | |
Flat Rate | |
Commercial | $150.00 |
Residential | $75.00 |
(8) Each additional duct work/base board | 2.00 |
(9) Kitchen hood | 5.00 |
(10) Exhaust fan | 5.00 |
(11) Space heaters, pool heaters, gas | 5.00 |
(12) Fireplace | 25.00 |
(13) Boiler | 25.00 |
(14) Minor OBC permit as approved by the Director of Inspections | $50.00 |
(c) Incinerators:
(1) Interior - residential | 5.00 |
(2) Built-in - residential | 25.00 |
(3) Commercial or industrial | 100.00 |
(d) Additional penalty fees:
(1) Where work is begun without first obtaining a permit and paying the fee as indicated above, the applicant for a permit shall be charged a fee of triple the amount of the fee indicated in this section. | |
(2) Reinspection of same item | 100.00 |
(3) Inspection call and appearance of inspector on property and work not ready | 100.00 |
(4) Work covered without inspection | 100.00 |
(Ord. 2021-118. Passed 12-2-21; Ord. 2022-6. Passed 1-20-22.)