The final plat shall show the following:
(a) The general location of the subdivision.
(b) The name under which the proposed subdivision is to be recorded and the names and addresses of the subdivider, the owners, and of the registered engineer or registered surveyor, platting the tract. The proposed name of the subdivision shall not duplicate the name of any other subdivision already in use in Madison County.
(c) The location of present property, section and Congressional Township Lines, U.S. Survey and lines of incorporated areas, streets, buildings, watercourses, sinkholes, tree masses and other similar existing features within the area to be subdivided and on property immediately adjacent thereto.
(d) The boundaries of the property with accurate distances and bearings and the lines and extent of all proposed streets with their width and names and any other areas intended to be dedicated to public use.
(e) The lines of adjoining streets and alleys, with their width and names.
(f) All lot lines and easements with their dimensions.
(g) All dimensions, both linear and angular, necessary for locating boundaries of the subdivided area, including lots, streets, alleys, easements and building line setbacks, and any other similar public or private areas. The linear dimensions shall be expressed in feet and decimals of a foot.
(h) Radii, arcs, points of tangency, central angles for all curvilinear streets, and radii for all rounded corners.
(i) All lot lines and an identification system for all lots and blocks.
(j) The accurate outline of any property which is offered for dedication for public use.
(k) All survey monuments and bench marks together with their descriptions.
(l) Title and description of property subdivided, showing its location and extent, point of compass, scale of plan, and name of subdivider and certificate of registered land surveyor that the plan represents a survey made by him and that the results of said survey are correctly shown thereon.
(m) Any private restrictions shall be shown on the plat or reference made to them thereon, and plats shall contain proper acknowledgment of owners and holders of mortgages accepting said platting and restrictions.
(n) A certificate shall accompany the final plat showing that all taxes due shall have been previously paid and a certificate of title or photo copy thereof shall be submitted for inspection.
(o) A certificate by the owner of the land to the effect that he has caused said land to be platted and that he dedicates to public use the streets, parks and other land indicated on the plat as intended for public use.
(p) There shall be submitted with each plat, a tabulation showing the exact area of each lot, reserve or other parcel on said plat (other than streets and alleys), such area to be computed inclusive of and after the extensions of lot or parcel lines to the centerline of contiguous public ways, such as streets or alleys. The purpose of this requirement is to facilitate calculation of the water, storm water, and trunk sanitary sewer benefit charges for each lot and parcel.
(q) The final plat is to be drawn at a scale of 100 feet or less to the inch from an accurate survey and on one or more sheets whose dimensions are 24 inches by 36 inches. In certain unusual instances, where the subdivided area is of unusual size or shape, the Planning and Zoning Commission may permit a variation in the scale or size of the final plat. (Ord. 22-089. Passed 12-5-22.)