Minimum pavement widths face to face of curb, required to be installed at the subdivider’s expense, shall be as follows:
(A) Primary and secondary thoroughfares, collector streets, shown as such on the official Thoroughfare Plan, local streets and minor streets over 600 feet long: 27 feet. In the case of a primary or secondary thoroughfare, and in the case of local street or collector street, usually requiring pavements wider than 27 feet, the matter of financial and other arrangements for installing such wider pavements at the time the subdivider will make the improvement shall be taken up with the subdivider by the official having jurisdiction;
(B) Minor and dead-end streets not over 600 feet long: 20 feet. The pavement of a turning circle at the dead-end street shall have a minimum outside diameter of 60 feet. A “T” or “Y”shaped paved space, when approved by the Planning Commission in place of a turning circle, shall extend entirely across the width of the street right-of-way and shall be at least ten feet wide with the flared portion rounded by minimum radii of 20 feet; and
(C) Alleys and service drives: 18 feet.
(2003 Code, § 152.33) (Ord. 1868, passed 9-15-1966)