(A) The installation of street identification signs shall conform to the current signs being used by the County Highway Department. In order to have clarity and uniformity, the County Highway Department will furnish and install said signs at their costs, said costs will be paid by the developer prior to the final acceptance of any street.
(B) In the event that subsequent action by the county modifies the procedure to allow for private installation of street signs, then the developer must install the street signs according to the specifications adopted by the county and available at their office and which are to be included as an exhibit at the back of this chapter.
(C) Bituminous binder: this item shall consist of a hot mixed, hot laid asphaltic concrete binder course. Refer to applicable provisions of § 401.
(D) Bituminous surface: this item shall consist of a hot mixed, hot laid asphaltic concrete constructed as a medium-texture surface course. Refer to § 401.
(E) Pavement types.
(1) Type I pavement construction shall be required for primary and secondary thoroughfares; shall have a 110-pound per square yard surface course, 385-pound per square yard base course, and an eight-inch compacted aggregate base.
(2) Type II pavement construction shall be required for collector streets; shall have a 110-pound per square yard surface course; 275-pound per square yard base course; and a seven-inch compacted aggregate base.
(3) Type III pavement construction shall be required for minor streets; shall have a 110-pound per square yard surface course; 220-pound per square yard base or binder course; and a seven-inch compacted aggregate base.
(1982 Code, § 55.152) (Ord. passed 4-21-1993; Ord. passed 7-25-2001)