The following regulations shall govern the design and layout of lots:
(A) The lot arrangement and design shall be such that all lots will provide satisfactory building sites, properly related to topography and the character of surrounding development.
(B) All lots shall conform to or exceed the requirements of these subdivision regulations and the zoning district requirements for district in which they are located and/or the use for which they are intended.
(C) Lot size where neither centralized sewage treatment or public water facilities are available must have a minimum of 20,000 square feet; where centralized, sewage treatment and not public water is available lots must have a minimum of 15,000 square feet; where public water facilities but not centralized sewage treatment is available, lots must have a minimum of 20,000 square feet. All such areas shall be exclusive of all road rights-of-way. Lots having neither centralized sewage or water facilities shall have a minimum width of 100 feet at the set back line.
(D) All side lot lines shall be at right angles to street lines and radial to curved street lines, except where the Commission determines that a variation to this rule would provide a better layout.
(E) Lots with double frontage shall be avoided.
(F) No corner lot shall have a width at the building line of less than 100 feet.
(Ord. 20-89, passed 6-28-89)