§ 151.086 IMPROVEMENTS REQUIRED FOR ALL SUBDIVISIONS.
   The subdivider-developer shall be required to provide the following improvements to residential subdivisions unless the Council elects to do so under a development agreement.
   (A)   Steel monuments shall be placed within six inches of final elevation at all lot corners, block corners, angle points, points of curves in streets and at intermediate points as shown on the final plat. The installation shall be the subdivider's expense and responsibility. All U.S., state, county or other official benchmarks, monuments or triangulation stations in or adjacent to the property shall be preserved in precise position.
   (B)   Following the Director of Engineering's approval of street and sidewalk grading, and after utility installation, streets and sidewalks shall be surfaced according to standards contained in §§ 151.045 and 151.047 and according to Director of Engineering specifications.
   (C)   (1)   All utilities shall be installed underground so as to enhance the visual appearance of the area, unless special permission is granted by the Council for other installations. Where utilities are to be installed in street or alley right-of-way, the installations shall take place prior to street surfacing. Water and sewer services shall be laid to the property line. Sizes of water and sewer mains and service lines shall be specified by the Director of Engineering.
      (2)   Sanitary sewer facilities adequate to serve the subdivision shall be installed in accordance with the latest plans and specifications of the Director of Engineering and shall meet the requirements of the master plan for sewer main extensions of the municipality.
   (D)   Storm sewer and/or other surface drainage facilities shall be installed as determined by the Director of Engineering for the proper drainage of surface waters.
(`86 Code, § 10.53) (Am. Ord. 706, passed 12-2-97)