§ 154.030 I-1, LIMITED INDUSTRY DISTRICT.

   (A)   Purpose. The purpose of the I-1, Limited Industry District is to provide locations for light industrial, office, logistics and business service buildings in a landscaped setting.

   (B)   Permitted principal uses.

      (1)   Refer to Table 6-1.

      (2)   Some permitted uses have requirements that are presented in §§ 154.109 through 154.143, Specific Development Requirements. Refer also to §§ 154.148 through 154.169, General Development Requirements.

   (C)   Conditional principal uses.

      (1)   Refer to Table 6-1.

      (2)   Refer to §§ 154.109 through 154.143 for specific conditions that must be met for approval of some conditional uses. Refer also to §§ 154.148 through 154.169, General Development Requirements.

   (D)   Accessory uses.

      (1)   Refer to Table 6-2.

      (2)   Refer to §§ 154.109 through 154.143 and §§ 154.148 through 154.169 for conditions that must be met for approval of certain accessory uses.

   (E)   Dimensional requirements.

Table 6-3: Required Setbacks, I-1 District

 

	Front	Side	Rear	From Residential District	From Wetland, Lake or Stormwater Pond
Principal building	30	7	10	40	§§ 154.047 - 154.063, Shoreland Overlay District; § 154.169, Wetlands
Parking	10	7	10	20
Driveway	10	7	10	20
Accessory building	30	7	5	40

 

Table 6-4: Minimum Lot Dimensions, I-1 District

 

Feature	Minimum
Area	40,000 s.f.
Width	150

 

   (F)   Driveway width. The maximum width for any portion of an industrial driveway in the public road right-of-way shall be 28 feet if two lanes or 36 feet if three lanes. Alterative designs may be approved by the City Engineer.

   (G)   Specific development requirements.

      (1)   Some conditional uses and some permitted uses have specific requirements that are presented in §§ 154.109 through 154.143, Specific Development Requirements.

      (2)   Refer to Table 6-1 for the uses that have specific requirements.

   (H)   General development requirements. Development requirements that apply to all uses are presented in §§ 154.148 through 154.169, General Development Requirements. All buildings are subject to the exterior building requirements section of the General Development Requirements.

(Ord. 1040, passed 1-5-16)