(A) An identification plate showing the drilling contractor and his or her registration number shall be installed on the well within 24 hours after the drilling is complete.
(B) The identification plate shall be constructed of a durable, weather-proof, rust-proof metal, or equivalent material.
(C) The identification plate shall be securely attached to the well casing or enclosure floor around the casing where it is readily visible.
(D) The identification plate shall not be removed from the well by any person.
(E) The identification tag shall be stamped with a permanent marking within 30 days after drilling is completed to show the:
(1) Total depth of well;
(2) Casing depth (feet) and inside diameter (inches);
(3) Screened intervals of screened wells;
(4) Gravel interval of gravel-packed wells;
(5) Yield or specific capacity expressed in gallons per minute (gpm), or gallons per minute per foot of draw-down (gpm/ft.-DD); and
(6) Static water level and date measured.
(Ord. passed 7-23-1984)