The district is intended to be a quiet, low density neighborhood consisting of residences for the privacy and convenience of the residents, and the district shall contain no less than six acres with a density not greater than three dwellings per 1.05 acres.
(A) Permitted uses. Single-family detached dwellings and/or Planned Unit Development.
(B) Dimensional requirements. Within the R-35-C-T Residential District as shown on the zoning map, the following dimensional requirements shall be complied with:
(1) Twenty thousand square feet minimum lot area per dwelling unit.
(2) Yard, setback, lot size, type of building unit, height and frontage requirements shall be determined by the Village Council after consideration of any recommendation of the Planning Board under the Planned Unit Development procedure as set out in § 94.69.
(3) Minimum square footage for each residence shall be 2,000 square feet total enclosed area, exclusive of patios, open porches and decks.
(C) Special use. The following use is permitted if the Village Council issues a special use permit allowing it in accordance with the requirements in § 94.58: The excavation of more than 200 cubic yards, or addition of more than 200 cubic yards of dirt, soil, earth or other fill material.
(Ord., passed 2-22-79; Am. Ord., passed 1-25-89; Am. Ord., passed 2-18-01; Am. Ord., passed 2-9-20; Am. Ord., passed 6-23-21)