§ 156.122 DIMENSIONAL REQUIREMENTS TABLE.

Dimensional Requirements Table
District	Min. Lot Area (sq. ft.)1	Max. Number of Dwelling Units per acre for Two-Family and Multi-Family Developments1	Min. Lot Width at Building Line (ft.)	Min. Yard-Front (ft.)	Min. Yard- Side (ft.)4	Min. Yard - Rear (ft.)5	Max Heig ht (ft.)6
RA	30,000	4	150	50	15	20% of mean lot depth, not to exceed 30	35
R-20	20,000	4	100	45	15	20% of mean lot depth, not to exceed 30	35
R-8 R-8 (O)2	8,000	8	85	45	12	20% of mean lot depth, not to exceed 30	35
R-7 MHE	7,000	N/A	N/A	N/A	N/A	N/A	N/A
R-6	6,000	9	75	30	12	N/A	35
R-6 MH	6,000	9	N/A	306	N/A	N/A	N/A
NB-1	None	N/A	N/A	N/A	N/A	N/A	N/A
NB-2	None	N/A	N/A	45	127	N/A	N/A
B-l	None	N/A	N/A	None	06	None	35
I-1	1 acre	N/A	200	50	15	20	None
1   The County Environmental Health Department may require a larger lot because of soil conditions
2   Class A manufactured homes on individual lots permitted
3   Computations begin anew for each building
4   Accessory building may be located in rear yard only
5   To be exceeded only when depth of the front and total width of side yards required is increased by 1 foot for each 2 feet or fraction thereof of building height in excess of 35 feet
6   On corner lots, the side yard adjacent to the street shall have not less than 50% on the front yard required the lot in rear of such corner lot
7   Not applicable within a planned unit development
8   When a business abuts a residential district, the structure shall be a minimum of ten feet from all exterior property lines abutting the residential district

 

(Ord. passed 9-3-1986; Ord. O-2006-10, passed 12-5-2006; Ord. passed 5-6-2008)