(A) Purpose. To allow for limited development in areas of the city where topography or natural resources require careful alterations to the land and placement of structures and infrastructure.
(B) Uses. See the Use Chart located in § 162.060 of this chapter for all permitted, conditional and interim uses.
(C) Standards, district performance standards.
(1) Lot standards.
Bluff setback (top/toe of bluff) | 30 feet |
Maximum height | 35 feet |
Maximum residential density | 2 dwelling units per acre |
Minimum lot frontage | 25 feet |
Minimum lot size (private sewer) | 20,000 square feet |
Minimum lot size (city sewer) | 9,600 square feet |
Minimum lot width | 60 feet |
(2) Principal building setbacks.
Corner side street | 10 feet |
Front | 25 feet |
Rear | 25 feet |
Side | 5 feet |
(3) Accessory building setbacks.
Corner side street | 10 feet |
Front | Behind principle structure |
Rear | 3 feet |
Side | 3 feet |
(4) Septic systems.
(a) Sites on septic systems must be able to provide two individual septic locations, a primary and a backup which are indicated on the site plan.
(b) All septic systems must meet the standards identified by the state’s Pollution Control Agency in Minn. Rules Ch. 7080.
(Prior Code, § 305.06) (Ord. passed 12-18-2007; Ord. passed 7-2-2018)