Skip to code content (skip section selection)
(a) The operator must apply for all necessary permits prior to installation of any grease trap or interceptor.
(b) The Building Department shall oversee the installation of the trap or interceptor.
(c) Waste shall only enter the grease interceptor through the inlet-flow-control device.
(d) Sample port. All grease trap lids shall be readily accessible for inspection or a sampling port shall be installed on the effluent line of each grease trap. The port shall be installed in such a manner as to be protected from storm water contamination and maintained in a safe and proper operating condition. The plug on the sample port must be easily removable.
(Ord. 2009-99. Passed 12-7-09.)