§ 50.09 TAP FEES SCHEDULE.
   The city is establishing a tap fees schedule. The Safety-Service Director is hereby authorized to set a water, sanitary and storm sewer tap fees schedule. These fees shall apply only to new construction; if a connection already exists from a previous home, then the capacity charges would not apply. However, the fee for the water tap and the inspection fee shall still apply. The Safety-Service Director shall, after reasonable notice, discontinue service, or not turn on any water service if it is found that there was a failure to comply with the city's inspection policies or to obtain the required permits.
WATER, SANITARY AND STORM SEWER TAP FEE SCHEDULE
WATER
Tap Size
Capacity Charge
Tap Cost
Total
WATER
Tap Size
Capacity Charge
Tap Cost
Total
¾-inch
$1,000
$800
$1,800
1-inch
$1,200
$1,000
$2,200
1-1/2 inch
$1,500
A.T. & M.
TBD
2-inch
$2,000
A.T. & M.
TBD
3-inch
$3,000
A.T. & M.
TBD
4-inch
$4,000
A.T. & M.
TBD
6-inch
$6,000
A.T. & M.
TBD
8-inch
$8,000
A.T. & M.
TBD
 
Capacity charge and tap costs for taps larger than 8 inches will be determined at the time of application. The fee for fire taps will be based on actual time and material cost.
* A.T. & M. = Actual Time and Material
* TBD = To Be Determined
 
SANITARY
Tap Size
Capacity Charge
Permit/
Inspection
Total
6 inches
$1,000
$150
$1,150
8 inches
$3,000
$150
$3,150
10 inches
$6,000
$150
$6,150
12 inches
$12,000
$150
$12,150
 
 
STORM
Tap Size
Capacity Charge
Permit/
Inspection
Total
N/A
N/A
$150
$150
 
* $100 of the Permit Fee will be returned to permit applicant upon final approval.
(1981 Code, § 50.09) (Ord. 00-08-069, passed 10-9-2000; Am. Ord. 06-10-057, passed 11-13-2006)