(A) Size standards.
(2) Lots which are smaller than the minimum required for residential lots shall be identified on the plat as to their specific purpose and use, including restrictions if applicable.
(B) Area calculation. For the purpose of calculating built-upon area, total project area shall include total acreage in the tract on which the project is to be developed.
(C) Stormwater drainage facilities.
(1) The application shall be accompanied by a description of the proposed method of providing stormwater drainage.
(2) The subdivider shall provide a drainage system that diverts stormwater runoff away from surface waters and incorporates best management practices to minimize water quality impacts.
(D) Erosion and sedimentation control. The application shall, where required, be accompanied by a sedimentation and erosion control plan that has been submitted to and approved by the N.C. Division of Land Quality.
(E) Roads constructed in critical areas and watershed buffer areas.
(1) Where possible, roads should be located outside of critical areas and watershed buffer areas.
(2) Roads constructed within these areas shall be designed and constructed so to minimize their impact on water quality.
(Ord. 25 § 303, passed 12-6-1993) Penalty, see § 154.999