Standards for off-street loading shall be as follows.
(A) Location. All off-street loading berths shall be located on the same lot as the use served, but not in the required front setback. Off-street loading berths shall be provided in addition to required off-street parking and shall not be located within accessways.
(B) Size. Each required loading berth shall be not less than 12 feet wide, 35 feet long, and if enclosed and/or covered, 14 feet high. Adequate turning and maneuvering space shall be provided within the lot lines. At the Planning and Environmental Commission’s discretion, variations to
the minimum loading berth dimension standards outlined above may be approved or required, subject to the Planning and Environmental Commission finding that such variation is necessary to prevent negative impacts to the public right-of-way.
(C) Access. Accessways not less than ten feet or more than 20 feet in width shall connect all loading berths to a street or alley. Such accessways may coincide with accessways to parking facilities.
(Ord. 8(1973) § 14.502; Ord. 26(1982) § 5; Ord. 11(2003) § 1; Ord. 29(2005) § 29)