§ 192-15.   Specific pollutant discharge limitations. 
[Amended 5-12-2015 by Ord. No. 15-1302, § 1]
   A.   No person shall discharge wastewater to the BCWSA Wastewater Treatment Plant containing in excess of the following, unless specifically authorized by the BCWSA through issuance of a valid wastewater discharge permit:
Pollutant
Maximum Instantaneous
Concentration (mg/l)
Pollutant
Maximum Instantaneous
Concentration (mg/l)
BOD
300
TSS
300
Oil and grease
50
Phenols (T)
1.00
Cyanide (T)
0.50
Arsenic
0.10
Beryllium
2.00
Cadmium
0.50
Chromium (T)
2.00
Copper
2.00
Lead
0.20
Mercury
0.01
Nickel
1.00
Selenium
0.01
Silver
0.30
Zinc
2.00
 
   B.   No person shall discharge wastewater to the Ambler Wastewater Treatment Plant containing in excess of the following, unless specifically authorized to do so by Ambler and the operator through issuance of a valid wastewater discharge permit.
Pollutant
Maximum Instantaneous Concentration (mg/l)
Pollutant
Maximum Instantaneous Concentration (mg/l)
Arsenic
0.19
Aluminum
14.51
Cadmium
0.02
Chromium(T)
6.01
Chromium Hexavalent
0.42
Copper
1.28
Cyanide (T)
0.36
Lead
0.32
Mercury
0.0009
Molybdenum
Monitor Only
Nickel
2.16
Selenium
0.13
Silver
0.96
Zinc
l.55
Phenols
126
Total Phosphorous
52.64
Ammonia
No Limit
BOD
No Limit
TSS
No Limit
TDS
Monitor Only
 
   C.   No person shall discharge wastewater to the UMHJSA Wastewater Treatment Plant containing in excess of the following, unless specifically authorized to do so by UMHJSA and the operator through issuance of a valid wastewater discharge permit.
Pollutant
Maximum Instantaneous Concentration (mg/l)
Pollutant
Maximum Instantaneous Concentration (mg/l)
Arsenic
2.40
Aluminum
2,300
Cadmium
0.12
Chromium (T)
186.10
Chromium, Hexavalent
11.51
Copper
23.65
Cyanide (Free)
3.07
Cyanide (T)
3.07
Lead
3.36
Mercury
0.05
Nickel
24.31
Phenols
794.36
Selenium
1.94
Silver
4.93
Zinc
39.13
 
   D.   The above limits apply at the point where the wastewater is discharged to a POTW, which for purposes of these regulations includes all points within and throughout the sanitary sewer system. All concentrations for metallic substances are for total metal unless indicated otherwise. The Township or the operator may impose mass limitations in addition to, or in place of, the concentration-based limitations listed herein.