Skip to code content (skip section selection)
Compare to:
Loading...
§ 151.115 ADOPTION.
   A certain document, two copies of which are on file in the office of the Building and Zoning Department being marked and designated as the International Mechanical Code, 2012 edition, as published by the International Code Council, be and is hereby adopted as the Mechanical Code of the city for regulating and governing the design, construction, quality of materials, erection, installation, alteration, repair, location, relocation, replacement, addition to, use or maintenance of mechanical systems as herein provided; providing for the issuance of permits and collection of fees therefor; and each and all of the regulations, provisions, penalties, conditions and terms of the Mechanical Code are hereby referred to, adopted and made a part hereof as if fully set out in this section, with the additions, insertions, deletions and changes, if any, prescribed in this code.
(Ord. 2006-05, passed 3-6-2006; Ord. 2013-09, passed 8-5-2013)
§ 151.116 AMENDMENTS.
   (A)   The 2012 International Mechanical Code is amended and revised in the following respects:
      (1)   Section 101.1 is hereby amended by substituting “City of Troy, Illinois” for the words “[NAME OF JURISDICTION]” and by adding the sentence, “The term “jurisdiction” wherever appearing in this code shall mean the City of Troy, Illinois.”
      (2)   Section 109 Means of Appeal on page 6 of the 2012 International Mechanical Code is deleted in its entirety.
   (B)   The 2012 International Mechanical Code shall be administered by the Building Inspector.
   (C)   The penalties for violations of this code shall be those which are described in § 151.999.
   (D)   The fees for applications, permits and inspections shall be prescribed by the City Council.
(Ord. 2006-05, passed 3-6-2006; Ord. 2013-09, passed 8-5-2013) Penalty, see § 151.999
PLUMBING
Loading...