Skip to code content (skip section selection)
Compare to:
Loading...
§ 151.100 ADOPTION.
   A certain document, two copies of which are on file in the office of the Building and Zoning Department being marked and designated as the International Fuel Gas Code, 2012 edition, as published by the International Code Council, be and is hereby adopted as the Fuel Gas Code of the city for regulating and governing fuel gas systems and gas-fired appliances as herein provided; providing for the issuance of permits and collection of fees therefore; and each and all of the regulations, provisions, penalties, conditions and terms of the Fuel Gas Code, are hereby referred to, adopted and made a part hereof as if fully set out in this section, with the additions, insertions, deletions and changes, if any, prescribed in this code.
(Ord. 2006-05, passed 3-6-2006; Ord. 2013-09, passed 8-5-2013)
§ 151.101 AMENDMENTS.
   (A)   The following sections of the 2012 International Fuel Gas Code are amended and revised in the following respects:
      (1)   Section 101.1 is hereby amended by substituting “City of Troy, Illinois” for the words “[NAME OF JURISDICTION]” and by adding the sentence, “The term “jurisdiction” wherever appearing in this code shall mean the City of Troy, Illinois.”
      (2)   Section 109 Means of Appeal of the 2012 International Fuel Gas Code is deleted in its entirety.
   (B)   The 2012 International Fuel Gas Code shall be administered by the Building Inspector.
   (C)   The penalties for violations of this code shall be those which are described in § 151.999.
   (D)   The fees for applications, permits and inspections shall be prescribed by the City Council.
(Ord. 2006-05, passed 3-6-2006; Ord. 2013-09, passed 8-5-2013) Penalty, see § 151.999
INTERNATIONAL MECHANICAL CODE
§ 151.115 ADOPTION.
   A certain document, two copies of which are on file in the office of the Building and Zoning Department being marked and designated as the International Mechanical Code, 2012 edition, as published by the International Code Council, be and is hereby adopted as the Mechanical Code of the city for regulating and governing the design, construction, quality of materials, erection, installation, alteration, repair, location, relocation, replacement, addition to, use or maintenance of mechanical systems as herein provided; providing for the issuance of permits and collection of fees therefor; and each and all of the regulations, provisions, penalties, conditions and terms of the Mechanical Code are hereby referred to, adopted and made a part hereof as if fully set out in this section, with the additions, insertions, deletions and changes, if any, prescribed in this code.
(Ord. 2006-05, passed 3-6-2006; Ord. 2013-09, passed 8-5-2013)
Loading...