(A) No discharge to public sewers may contain:
(1) Cyanide greater than one mg/l;
(2) Fluoride other than that contained in the public water supply;
(3) Chlorides in concentrations greater than 250 mg/l;
(4) Gasoline, benzene, naphtha, fuel oil or other flammable or explosive liquid, solid or gas; or
(5) Substances causing an excessive chemical oxygen demand (C.O.D.).
(B) No waste or wastewater discharge to public waters may contain:
(1) Strong acid, iron pickling wastes or concentrated plating solutions whether neutralized or not;
(2) Fats, wax, grease or oils, whether emulsified or not, in excess of 100 mg/l or containing substances which may solidify or become viscous at temperature between 32°F and 150°F (0°C and 65°C);
(3) Objectionable or toxic substances, exerting an excessive chlorine requirement, to a degree that any such material received in the composite wastewater treatment works exceeds the limits established by the approving authority for the materials; or
(4) Obnoxious, toxic or poisonous solids, liquids or gases in quantities sufficient to violate the provisions of § 51.21(A).
(C) No waste, wastewater or other substance may be discharged into public sewer which has a pH lower than five and one-half or higher than nine and one-half, or any other corrosive property capable of causing damage or hazard to structures, equipment and/or personnel at the wastewater facilities.
(D) All waste, wastewater or other substance containing phenols, hydrogen sulfide or other taste- and odor-producing substances, shall conform to concentration limits established by the approving authority. After treatment of the composite wastewater, concentration limits may not exceed the requirements established by state, federal or other agencies with jurisdiction over discharges to receiving waters.
(Ord. passed - -) Penalty, see § 51.99