The connection of the building sewer into the public sewer shall be at the property line when such interceptor is available to the owner's property. Connection at the property line shall be made with a clean-out wye at the owner's expense. If no interceptor is available to the property line or if the location of the interceptor is other than that desired by the owner, the owner shall at his expense, install a connection to the public sewer at a location approved and as specified by the Health Officer. Such connection shall be made by cutting a neat hole into the public sewer to receive the building sewer, with entry in the downstream direction at an angle of approximately forty-five degrees. A forty-five degree ell may be used to make such connections, with the spigot end cut so as not to extend past the inner surface of the public sewer. The invert of the building sewer at the point of connection shall be at the same or at a higher elevation than the invert of the public sewer. A smooth, neat joint shall be made, and the connection made secure and watertight by encasement in concrete. Special fittings may be used for the connection only when approved by the City Manager.
(Ord. 12-77. Passed 5-5-77.)