(A) The plans shall be submitted on 24 inches by 36 inches sheets. No other size will be allowed unless specifically approved by the city.
(B) Plans shall be submitted at the scale necessary to make the plans easily read and interpreted. Plans shall be on a scale of not less than one inch equals 50 feet. The layout shall include, but shall not be limited to the following information:
(1) Street right-of-way, proposed and existing.
(2) Existing and proposed utility and drainage easements.
(3) Horizontal curve data.
(4) Centerline stationing.
(5) Street names.
(6) Location and size of existing and proposed utilities.
(7) Location and size of existing and proposed drainage facilities.
(8) Intersection radii.
(9) Soil boring locations.
(10) California Bearing Ratio (CBR) Test Locations.
(11) Elevations at the beginning, mid-point, and end of the radius returns at all intersections.
(12) A legend showing typical symbols used in the plans.
(13) Existing and proposed property lines.
(14) North arrow and scale.
(15) Street and right-of-way dimensions.
(16) Sidewalks and trails with dimensions.
(17) Handicap access ramp locations.
(C) Street profiles shall be shown on a horizontal scale to match the layout with a vertical scale of not less than one inch equals five feet. Information to be shown with the profiles shall include, but shall not be limited to:
(1) Existing ground elevations.
(2) Vertical curve data.
(3) Proposed and existing drainage and utility line crossings (size and location).
(4) Proposed finished grades at street centerline.
(5) Cross sections at a maximum spacing of 50 feet. Additional cross sections shall be where needed for clarification purposes.
(D) A typical street section for all classes of streets designed shall be included in the plans and shall show the following with associated dimensions:
(1) Pavement type, width and thickness including subgrade and base layers.
(2) Dimensions from back of curb to back of curb.
(3) Cross slope and crown.
(4) Location of profile grade.
(5) Curb and gutter.
(6) Existing and proposed grades.
(7) Right of way width.
(8) Sidewalks or trails, if required. Include dimensions for locating behind back of curb.
(9) Landscaping, if required.
(E) Revisions to drawings shall be indicated above the title block and shall show the nature of revisions and preparation date. Cloud revision(s) in plan and/or profile view(s).
(Ord. 2009-11-347, passed 11-3-09; Am. Ord. 2010-06-356, passed 6-1-10; Am. Ord. 2018-11-816, passed 11-6-18)