(a) All Industrial Users which discharge industrial wastes or toxic pollutants into the public sewer shall, when required by the Control Authority, provide, operate and maintain at their own expense monitoring facilities such as control manholes at each discharge point to the sanitary sewer to allow inspection, sampling, and flow measurement of each sewer discharge to the POTW. These facilities shall be constructed at locations and in accordance with plans and specifications approved by the Director prior to the beginning of construction.
(b) Each monitoring facility shall be situated on the User's premises, except where such a location would be impractical or cause undue hardship to the User. The Director may concur with the facility being constructed in the Public Street or sidewalk area if the facility is located so that landscaping or parked vehicles will not obstruct it. There shall be ample room in and near such sampling facility to allow accurate sampling and preparation of sampling for analysis.
(c) If sampling or measuring devices are to be permanently installed, they shall be of a type acceptable to the Control Authority and approved prior to installation.
(d) The monitoring facility, sampling and measuring equipment, shall be maintained at all times in a safe and proper operating condition at the expense of the Industrial User.
(Ord. 210-12. Passed 5-8-12.)