(a) Any new source to which this subpart applies (with the exception of sources subject to Sections 1787.03, 1787.06 and 1787.08), which has an initial start-up date preceding the effective date of this revision, shall provide the following information to the Commissioner postmarked or delivered within ninety days of the effective date. In the case of a new source that does not have an initial start-up date proceeding the effective date, the information shall be provided, postmarked or delivered, within ninety days of the initial start-up date. Any owner or operator of an existing source shall provide the following information to the Commissioner within ninety days of the effective date of this subpart unless the owner or operator of the existing source has previously provided this information to the Commissioner. Any changes in the information provided by any existing source shall be provided to the Commissioner, postmarked or delivered, within thirty days after the change.
(1) A description of the emission control equipment used for each process; and
(2) If a fabric filter device is used to control emissions.
A. The airflow permeability in m3/min/m2(ft3/min/ft2)if the fabric filter device uses a woven fabric, and, if the fabric is synthetic, whether the fill yarn is spun or not spun; and
B. If the fabric filter device uses a felted fabric, the density in g/M2/(oz/yd2), the minimum thickness in millimeters (inches) and the airflow permeability in m3/min/m2/(ft3/min/ft2).
(3) If a HEPA filter is used to control emissions, the certified efficiency.
A. A brief description of each process that generates asbestos-containing waste material; and
B. The average volume of asbestos-containing waste material disposed of, measured in M3/day (yd3/day); and
C. The emission control methods used in all stages of waste disposal; and
D. The type of disposal site or incineration site used for ultimate disposal, the name of the site operator and the name and location of the disposal site.
A. A brief description of the site; and
B. The method or methods used to comply with the standard; or alternative procedures to be used.
(b) The information required by subsection (a) hereof must accompany the information required by 40 CFR Part 161, Subpart M: National Emission Standards for Asbestos. Active waste disposal sites subject to Section 1787.14 shall also comply with this provision. Roadways, demolition and renovation, spraying and insulating materials are exempted from the requirements of 40 CFR Part 161, Subpart M: National Emission Standards for Asbestos. The information described in this section must be reported using the format of Appendix A of this part as a guide.
(Ord. 46-93. Passed 2-2-93.)