1166.14 SIGNS PERMITTED IN INDUSTRIAL DISTRICTS.
 
SIGNS PERMITTED IN INDUSTRIAL DISTRICTS.
Sign
Style
Sign Type
Permitted
Signs
(#1)
Max.
No. Per
Zone Lot
Max.
Area Per
Zone Lot
Max. Area Per
Individual
Sign Face
Max.
Width
Max. Ht.
From
Grade (#2)
Setback
Front (#2)
Setback
Side &
Rear (#2)
Other
Requirements
All Permitted Signs in the M Districts
Internal and external
illumination permitted
with a sign permit (#3)
Freestanding Signs
Area Identification Sign
P
1 per
development
entrance
100 s.f.
14 ft.
6 ft.
10 ft.
10 ft.
Low Profile or Monument Sign
P
1 per street frontage
100 s.f.
10 ft.
6 ft.
10 ft.
10 ft.
Building Signs
Awning Sign
P
2
The lesser of 6 s.f. or 25% of the
vertical surface
of awning
(# 4)
5 ft.
5 ft.
Canopy or Marquee Sign
P
1
10% of the wall
area of which such sign is a part
25% of vertical
surface of canopy
or marquee
(# 4)
3 ft.
from
curb
face
5 ft.
Identification Sign
N
1 per Bldg.
1.5 s.f.
1.5 s.f.
(# 5)
 
Projecting Sign
P
1
10% of wall area of which such sign is a part
40 s.f.
8 ft.
(#4)
-
-
-
Suspended / Swinging Sign
P
1 per Bldg.
Entrance
12 s.f.
6 s.f.
6 ft.
(# 4)
Wall Sign
P
1 per building unit (# 6)
100 sq. ft.
Permanent Window Sign
P
1
25% of the total
window area of
each ground floor
occupancy of a
building (# 7)
12 ft.
 
(Ord. 84-2006. Passed 8-21-06.)
 
Footnotes to Signs Permitted in the Industrial Districts:
Footnotes to Signs Permitted in the Industrial Districts:
#1.
P = Sign permit required; N = No sign permit required
#2.
Signs located within sixty (60) feet of a street intersection or a railroad and a street intersection must provide a clear view between heights of two and one-half (2-1/2) feet and 10 feet and shall not be located within 10 feet of a curb line or a paved roadway. Signs shall not be allowed to project over public rights of way.
#3.
No direct light or significant glare from sign illumination shall be cast onto any right-of-way or adjacent zone lot that is zoned or used for residential purposes. No exposed bulbs or signs of excessively bright luminance are permitted.
# 4.
A vertical clearance of 10 feet is required from a sidewalk, private drive, or parking area. Signs attached to the underside of a canopy or marquee shall have a minimum clearance of 8 feet from same. Where applicable, a vertical clearance of 14 feet is required from a public street.
# 5.
Only name and address of occupant allowed on sign. Identification wall signs not exceeding 4 square feet in area with non-illuminated letters may be permitted in addition to regulated signage.
# 6.
Premises fronting on more than one public right of way may not combine permissible signs for one frontage with another frontage for the purpose of placing the combined area of signs on the frontage.   
# 7.
The percentage figure here shall mean the percentage of the area of the wall of which such sign is a part or to which each such sign is most nearly parallel.
 
(Ord. 1-2006. Passed 2-22-06.)