An applicant seeking review of a final plat shall submit the following required documents:
(A) A completed final plat application and final plat checklist, as provided in Appendix I of these regulations, together with all attachments required on the application;
(B) A final plat prepared by a professional engineer or professional surveyor registered in the state of Ohio and drawn at a scale not less than 100 feet to the inch (1"=100'). A final plat of a subdivision located in Fulton County shall be submitted on one or more sheets 18 by 24 inches in size. A final plat of a subdivision located in Lucas County shall be submitted on one or more sheets 20 by 30 inches in size. The final plat shall be clearly and legibly drawn in ink on mylar. The final plat shall contain the following information:
(1) Name of the subdivision;
(2) Location by section, town, range, township, county, state;
(3) The scale, date and north point;
(4) All plat boundaries with length of courses in feet and hundredths and bearings to half minutes. When required by the Village Engineer, all calculations and filed notes shall be submitted;
(5) Bearings and distances to the nearest established street lines, section corners or other recognized permanent monuments, which shall be accurately described on the plat;
(6) Village, township, county or section lines accurately tied to the subdivision by distances and bearings;
(7) Location, names and widths of streets within the plat;
(8) Length of all arcs, chord bearings, radii, internal angles, points of curvature and tangent bearings;
(9) All easements for rights-of-way providing for public services or utilities, and any limitations of such easements;
(10) All lot numbers and lines, with accurate dimensions in feet and hundredths, and with bearings or angles to street and alley or crosswalk lines;
(11) Accurate location of all monuments;
(12) Accurate outlines of any areas to be dedicated or temporarily reserved for public use with the purpose indicated thereon;
(13) Building setback lines, with dimension; and
(14) When lots are located on a curve or when side lot lines are at angles other than 90 degrees, the width at the building line shall be shown.
(C) A notation of any deed restrictions or covenants shall be included on the final plat.
(D) The required certifications, where appropriate, shall be affixed to the final plat.
(Ord. 2023-03, passed 2-27-2023)